The versatility of Techno Metal Post for deck construction

Earlier this summer we were contacted to install two helical piers for a deck remodel. Our busy schedule kept us away for about a week; but we assured the contractor that they could start the framing ahead of our arrival.

The contractor started the framing and even the decking inlay before we arrived. It took us about 45 minutes to install the two required posts for this job.

Two Techno Metal Posts installed around a deck under construction.

Before we left, they had the new beam set and were installing the remaining deck joists.

The building can begin immediately after the Techno Metal Post has been installed.

The building can begin immediately after the Techno Metal Post has been installed.

On another recent job; Techno Metal Post Alaska was called out to replace all the deck supports surrounding this wrap around deck with roof. The existing foundation had heaved and caused the decking and roof to be lifted up to 3″ in some places.

Techno Metal Post Alaska was able to save this deck.

Techno Metal Post Alaska was able to save this deck.

The Home Owner was able to prepare the deck perfectly for us for our installation. We installed 5 posts under the roof section.

Ready to repair this heaved deck / porch.

Our small equipment allowed us to install the new deck foundation under the existing roof with no alterations or additional construction.

Installing a helical pier for a deck under the existing roof.

A close up if the installed posts.

Our R2D machine's capability of installing around existing structures.

Finally, we finished up installing new posts around the remainder of the deck.

Installing Techno Metal Posts through an existing deck.

With just a little preparation Techno Metal Post Alaska can repair a deck that has heaved from frost in less than a day. Most importantly, we require very little alteration to your existing structure and can work around most structures.

This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply